SinoTrack Power Probe Circuit Tester 6-24V Automotive Power Circuit Diagnostic Tool Short Circuit Tester with Light Component Activation Polarity Identify Continuity Tester 15.7 inch Long Test Lead

Description

Note:
1. Do not use the item around explosive gas, vapor, or dust. When the power switch is pressed (or rocked), battery current is conducted directly to the tip which may cause sparks when contacting the ground or certain circuits.
2. The unit is not to be used with 110/220V house current, it is only used for DC6~24V systems.
3. Do not use AC voltage.
4. After you finish checking the vehicle, accurately restored all of the connection-s which you disconnected.
5. All the time follow the instructions and procedures indicated in the vehicle’s service manual before attempting to disconnect any part or subsystem of the electrical circuit.
6. Never touch any dangerous part of the vehicle with your hand for safety. Don’t touch any live conductor with your hand or skin.
7. Don’t use it if it is damaged.
8. Some components of vehicles work on low voltage, they cannot withstand the voltage allied by the item. To avoid damage to these components, don’t use the item to apply voltage directly or not directly.
9. Before driving, please All the time make sure that the vehicle is Secure and reliable.10. Don’t use this item when driving.

Specification:
Operation voltage: 6-24V DC Cable length: about 4m
Overload protection: 7A(When the current exceeds 7A,this item will disconnect the current automatically.)
Weight: about 200g
Material Type: plastic and stainless
item Length:225mm/8.85inch
Lead Length:approximately 4M /15.7inch Item Width:30mm/1.18inch

Package List:
1 x Power Scan1x Probe Tip

Power Probe Circuit Diagnostic Tool: This multifunctional circuit tester can check switches, relays, and the on-off of diodes, fuses, and circuits, which can help us quickly find out whether there is a short circuit or poor grounding of components in the vehicle’s electrical system. Avoiding a short circuit or instant overload of the component leads to a blown fuse or circuit breaker tripping
Short Circuit Following and Locating: this probe tester assists you in tracking problem wires but also it can locate breaking points. Just connect the clips to the vehicle battery accurately, and use the probe tip quickly to contact the wire. If LED lights GREEN with buzzer, short circuit, and overloading component appears in this side
Polarity/Continuity Test: Not only can this auto circuit tester tool test the uncertain polarity of contact but also it can continuity test in the circuit of the vehicle. Contact the probe tip to a positive(+), LED light red. Contact the probe tip to a negative(-), LED light green. Connect the auxiliary ground lead to one side of the tested wire together with the probe tip connecting to the other side. When continuity is present, the LED will light green
Secure Test &Overload Protection: Equipped with overload protection, when the current exceeds 7A, the circuit tester will disconnect the current automatically and give you a buzzer prompt. You’ll be able to test poor ground contacts directly
Wide Compatibility: It works for all 6-24V DC vehicle electrical systems. The 15.7inch extension cord will get you anywhere in your vehicles, trucks, and trailers, and lets you test along all of the length of the vehicle without constantly on the lookout for suitable vehicle grounds