Description
🚗【Easy Operation Power Circuit Tester】Unroll the leads. Clamp the red clip of the power circuit probe tester to the positive terminal of the vehicle’s battery. Clamp the black clip to the negative terminal of the vehicle’s battery. After a simple hook-up of the circuit tracer to the vehicle’s battery, automotive technician can conduct a positive or negative battery current to the tip by rocking the power switch forward or backward
🚗【Short Circuit Test and Locating Test Light】The circuit tester is suitable for diagnostic in all 6V to 30V DC vehicle electrical systems. It can check switches, relays and the on-off of diodes, fuses and circuits, which let you reduce diagnostic time in automotive electrical systems. Typically, short circuit or instant overload of component will lead to blown fuse or circuit breaker tripping.This probe tester can assist you tracing problem wires and locating breaking points
🚗【Polarity Identification & Continuity Testing】This power circuit probe tester let you quickly identify positive and negative polarity of electric cables and plugs of vehicles. When the probe tip contact to the positive electrode, the RED light on. When the probe tip contact to the negative electrode, the GREEN light on. It can also test for continuity and do the jumper lead operation with the help of its auxiliary ground lead
🚗【Test Components In/Out of Vehicle’s Electrical System & Poor Ground Contact Testing】Power circuit probe tester could activate components out and in of the vehicle’s electrical system, test and check the components if defective or not, or if rating current of component is higher than that of the circuit tester. For some components, the negative terminal is required to be well grounded to deal with the float of large currents, this circuit tester is a good tool to test their grounding
🚗【20FT Long Extension Cable & LED Light Prompt & Buzzer Warning & Highly Sensitive Probe Clips】The cable length of the circuit tracer is about 20ft which allows you access and test any electrical system easily. The LED indicator and buzzer warning let you clear problems at a glance. Test light adopts advanced high sensitivity probe, which provides you quick and accurate detection, providing you better experience
🚗【Quick Self-Test & Overload Protection】Before you test a circuit or component, the test light can perform a quick self-test to make sure your tool is in good condition. Equipped with overload protection, when the current exceeds 10A, the circuit tester will disconnect the current automatically and provide you with a buzzer prompt. You’ll test poor ground contacts directly. Note: This electrical tester can not be used for 110/220V systems, it is just used for DC 6-30V systems
power circuit probe circuit breaker finder relay tester relay tester circuit tester circuit breaker finder tool relay tester automotive kit breaker finder probe 4 3 automotive tools trailer light tester
Reviews
There are no reviews yet.