Micsig 700V 100MHz High Voltage Differential Probe kit 3.5ns Rise Time 10X/100X Attenuation Rate Oscilloscope Probe Kit Accessory DP10007

Description

Specification:

Bandwidth: 100MHz

Rise Time: 3.5ns

Range Selection(Attenuation Rate): 10X/ 100X

Accuracy: ±2%

Maximum Differential Test Voltage(DC+ACPK): 70V(10X)/ 700V(100X)

Maximum input not unusual mode voltage(DC+ACPK): 70V(10X)/ 700V(100X)

Maximum Input Voltage-to-Earth: 600V CAT Ⅰ/ 1000V CAT Ⅱ

CMRR：≤-80dB@50Hz, ≤-60dB@20KHz, ≤-50dB@1MHz, ≤-40dB@10MHz

Input Impedance: 8MΩ/1.25pF(differential), 4MΩ/2.5pF(single-ended to ground)

Output Voltage: ≤7V

Overroad Alarm: Button light flashes

Power Supply: DC 5V, USB Supply

Power: 1.25W

Dimension: 1.45cm*6cm*2.7cm

Input cable length: Approx 45cm

Output cable length: Approx 90cm

Operating Temperature: 0℃~40℃

Operating Humidity: 10%~85%RH

Storage Temperature: -30~70℃

Storage Humidity: 5%~90%RH

WHAT’S INCLUDED?

1x Power Supply

1x USB power cable

2x hook clips, in red and black pairs

2x alligator clips, in red and black pairs

2x pincer clips, in red and black pairs

1x storage box

1x Chinese manual

Widely Used: The attenuation rate is 10X/100X, widely utilized in any brand of oscilloscope.
Maximum differential test voltage (DC+ACPK-PK): 70V (10X), 700V (100X). You’ll be able to safely measure floating voltages as much as 700V and have a bandwidth as much as 100 MHz.
More straightforward and Safer Use: High voltage differential probes sample high impedance isolation between input and output to offer protection to person safety. Power supply USB DC 5V output, more portable at the same time as Oscilloscope has USB interface.
Versatile Kit: All 6 pieces with three different connectors lend a hand to check quite a lot of on different occasions, including 2 alligator clips, 2 hook clips and 2 pincer clips.
Applications: Floating Measurements, Switch-Mode Power Supply (SMPS), Motor Drive Design, Power Device Testing & Evaluation, Power Converter Testing & Design.