Powertronics Probe 100 Plus (-USB)

Description

The Probe 100 is useful in identifying types of power disturbances that are on the 110 volt AC line. It is like taking a snapshot of specific power problems. If you’re having a problem with a pc system or peripheral, the Probe may also be plugged into the same circuit and left for a time period. When a problem is experienced with the equipment, immediate checking of the Probe’s LEDs will indicate the worst case power problem. If not one of the LEDs are illuminated then the problem may be with the hardware. The LEDs that are illuminated indicate the types of disturbances that can be affecting the equipment. The LEDs on the Probe “latch” in the ON position when the device receives a disturbance. Comes with the Probe Communications Software. This software facilitates the accumulation of the AC line voltage and Disturbances as they’re broadcast by the Probe 100+. These can then be plotted or stored on the PC for future analysis. The software is capable of generating voltage DATALOG charts and disturbance PIE CHARTS from the received data.

Plugs into 110V AC outlet and checks for problems
The P100+ Datalogger will detect the entire important types of power problems, and will Latch an LED to show them.
Broadcast all data about the disturbances through the USB port as they’re detected, in addition to the voltage reading each second.
Measures common-mode noise, Latches spikes (impulses), Latches high frequency noise
Trips on Surges and Sags, Latches Power failures, and Dropouts, Determines if the outlet is wired properly