Description
【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical regulate system and then the tool length setting, tool wear detection and tool breakage are detected by the program regulate. On the subject of no vibration and malfunction, the thermal deformation of the machine can also be corrected consistent with the rated voltage and current and the specified speed.
【Parameter】It is a typically closed 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
【Material】The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can also be right away connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
【Feature-1】This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and is probably not caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can also be right away input to the NC program.
【Feature-2】The tool setter will send out an alarm signal in time when it is over-go back and forth to keep away from other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool right away touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
Reviews
There are no reviews yet.