Description
【Suitable for Most 12V Battery Types 】The KINGBOLEN BM-560 car Battery Tester checks and reports on condition of 6V/12V battery types including: regular flooded, AGM flat plate, AGM spiral, GEL and EFB batteries. Accurate test results are to be had in 3 seconds.
【Test Features- Battery Test, Starting test, Charging & Load Test, 】Judge battery health through test data. ①test the battery by obtaining the exact CCA parameter form the battery and setting the benchmark accordingly; ②tests the voltage and time required to start the engine in the flame-out state; ③start the car engine and test the battery voltage status in the charging state; ④start the car engine, turn on the entire load appliances to test the voltage situation under the working state .
【Test quite a lot of battery parameters and compatible with 5 battery types】The BM560 battery tester can compatible with EFB, GEL, AGM Spiral, AGM Flat Plate and Regular Flooded battery. it can test cold cranking amps (CCA), batteries State of Charge (SOC), State of Health (SOH), voltage waveform, allows screen captures, real-time voltage monitoring, recording and replay and so on. It displays data the tested battery health and charging status and clearly indicates whether the battery must be replaced.
【Tests Extensive Range of 6V and 12V Batteries】 The KINGBOLEN BM-560 Battery Tester tests quite a lot of 6V and 12V batteries ranging from 100 to 2000 CCA, or 2AH to 200AH capacity. For smaller motorcycle, ATV, boat and other batteries there’s a 2AH ultra-low-capacity detection mode, allowing these lower capacity batteries to be as it should be tested and reported on. Most other battery testers wouldn’t have this capacity.
【Reverse Polarity Protection】The KINGBOLEN BM-560 Battery Tester is extremely low power and won’t discharge the battery. It also has reverse polarity protection to verify complete operator safety if cables are inadvertently connected to the battery incorrectly.
Reviews
There are no reviews yet.